Skip to main content

Coral Flexicom

These instructions help you configure your Coral Flexicom phone system to work with TIM Plus. Contact your system maintainer if you are not familiar with the configuration of your PBX.

Support files​

Ensure the following support files exist in the /config/ folder of the TIM Plus application:

Coral Flexicom 200.TDS
Coral Flexicom 200.TDT

Contents​

Configure the SMDR output​

info

You may need to purchase a license to enable SMDR on this PBX. Please speak to your system maintainer if you are unsure.

The Coral Flexicom phone system sends its SMDR data via a serial connection. You need to directly connect a serial cable from the phone system to the PC that NetPBX is installed and running on.

For more information about the output and configuration of your SMDR data, contact your system maintainer.

Installing NetPBX​

To collect call logging data from the serial port and send it to TIM Plus, you need to install the NetPBX software. For setup instructions, click on the link below:

Install and configure NetPBX

Configure TIM Plus​

Follow the steps below to configure TIM Plus to connect to your Coral Flexicom:

  1. Click on the Directory tab.
  2. If you don't have a site set up, press Add and select PBX from the drop-down menu. In the dialogue window, name your site and then select Add.
  3. Locate the site object you want to configure in the Directory, click on it and select Properties. coral_1
  4. In the Site Properties window, select Coral Flexicom 200 from the PBX model drop-down list.
  5. In the Connection method field, select No connection required from the drop-down list.
  6. Click on the Save button to apply the settings.